pf27/P2F7 surface mount glass passivated fast recovery rectifier reverse voltage 1000v forward current 2a features ? glass passivated fast recovery rectifiers ? heatsink structure ? low profile, typical thickness 0.8mm ? low forward voltage drop ? low leakage current ? moisture sensitivity: level 1 , per j-std-020 ? solder dip 260 c, 10 s typical applications for use of general purpose rectification in lighting, cellular phone, portable device, power supplies, and other consumer applications. vrrm v vrms v vdc v if(av) a ifsm a i 2 t a 2 sec tj, tstg c minimum breakdown voltage ta=25 ,ir=100ua v br maximum instantaneous forward voltage if=2 a,ta=25 v f ta=25 ta=125 i f =0.5a,i r =1.0a, i rr =0.25a typical junction capacitance 4.0 v, 1 mhz c j pf juntion to ambient r ja 1) juntion to lead r jl 1) juntion to case r jc 2) note:1),the thermal resistance from junction to ambient or lead, mounted on p.c.b with 55mm copper pads,2 oz,fr4 pcb 2),the thermal resistance from junction to case, mounted on p.c.b with recommended copper pads,2 oz,fr4 pcb 1000 v maximum reverse recovery time t rr 250 ns 10 typical thermal resistance 60 /w 10 35 1.3 maximum dc reverse current at rated dc blocking voltage i r 1 a 50 electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol pf27/P2F7 unit peak forward surge current 8.3 ms single half sine-wave superimposed on rated load 60 rating for fusing(t 8.3ms) 15.0 operating junction and storage temperature range - 55 to + 150 maximum rms voltage 700 maximum dc blocking voltage 1000 maximum average forward rectified current 2.0 maximum repetitive peak reverse voltage 1000 maximum ratings (t a = 25 c unless otherwise noted) parameter symbol pf27/P2F7 unit isga (sod - 123hs) www.goodark.com 1/4 2015.06-rev.a
pf27/P2F7 surface mount glass passivated fast recovery rectifier reverse voltage 1000v forward current 2a ratings and characteristics curves (ta = 25 unless otherwise noted) figure 1.forward current derating curve figure 2.maximum non - repetitive peak forward surge current figure 3. typical reverse characteristics figure 4. typical instantaneous forward characteristics figure 5. typical junction capacitance 0 10 20 30 40 50 60 1 10 100 peak forward surge current a number of cycles at 60hz ta=25 8.3ms single half sine - wave www.goodark.com 2/4 2015.06-rev.a
pf27/P2F7 surface mount glass passivated fast recovery rectifier reverse voltage 1000v forward current 2a package outline dimensions packing information packing quantities: packing tape specification soldering footprint www.goodark.com 3/4 2015.06-rev.a reel size quantity/reel quantity/inner box quantity/carton 7" 3k 30k 120k package unit:mm min max a 0.75 0.90 b 0.85 1.05 b1 0.85 1.05 c 0.1 0.25 d 1.9 2.1 e 2.9 3.1 l1 2.0 2.45 l2 0.4 0.85 l3 1.3 1.7 he 3.5 3.9 isga
pf27/P2F7 surface mount glass passivated fast recovery rectifier reverse voltage 1000v forward current 2a disclaimers these materials are intended as a reference to assist our customers in the selection of the suzhou good-ark product best suited to the customer s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to suzhou good- ark electronics co., ltd.or a third party. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, or infringement of any third-party s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by suzhou good-ark electronics co., ltd. without notice due to product improvements or other reasons. it is therefore recommended that customers contact suzhou good-ark electronics co., ltd. or an authorized suzhou good-ark electronics co., ltd. for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. please also pay attention to information published by suzhou good-ark electronics co., ltd. by various means, including our website home page. (http://www.goodark.com) when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. the prior written approval of suzhou good-ark electronics co., ltd. is necessary to reprint or reproduce in whole or in part these materials. please contact suzhou good-ark electronics co., ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2015.06-rev.a
|
